It is best not to touch up minor damage, such as scratches, with paint. Minor scratches will not affect the performance of your fence because the galvanised and aluminium/zinc coatings effectively protect any cut edges or scratches from corrosion.

We can confidently say that our fences may be used all over Australia, except for the tropical cyclone regions (defined in AS1170.2 - 1989 SAA Loading Code, Part 2: Wind Loads). Installation methods will vary slightly, depending on your wind region, terrain category and soil type.

For cyclonic regions see:
LYSAGHT® Fencing Cyclonic Area Design and Installation Guide

It is not recommended to unclip LYSAGHT KLIP-LOK® 406 once the cladding is installed. Unclipping can damage the clips, cladding or metallic coating on the cladding. It is difficult to assess how LYSAGHT KLIP-LOK® 406 will perform after such damage.

The special locating tabs on the spacer bar of the LYSAGHT KLIP-LOK 700 HI-STRENGTH® clip can be flattened easily to allow adjustment during installation.

Yes. Because of the unique assembly systems, additions are relatively simple to make. Furthermore, the original steel structure will be straight and true regardless of its age, making the job of matching up the addition easier.