Fix FAQs

The LYSAGHT NOVALINE® Fascia system has one style clip that can be used in all applicatons. This bracket is attached with 2 (minimum) screws to the base of the truss. The positioning of the bracket can vary depending on the soffit line and the ro...

It is good practice to only walk in the pans, however at supports only it is safe to stand on the ribs.

Some trades may choose to initially charge a little more for a steel framed home reflecting a reluctance to working with steel for the first time. However, with familiarity and competition, most trades quickly change their attitudes to NOT charge a ...

No. We do not recommend LYSAGHT MULTICLAD® for roofing purposes. Try our roofing profiles for other suggestions.  However this product is commonly used as an overall cladding for trailers, portable buildings, and the like.

LYSAGHT INTEGRITY® 820 is fixed through the ribs using screws, in the same way as many of the LYSAGHT® claddings. However, when fixing, a metal sealing washer is included to give the LYSAGHT INTEGRITY® 820 its high performance.

The special locating tabs on the spacer bar of the LYSAGHT KLIP-LOK 700 HI-STRENGTH® clip can be flattened easily to allow adjustment during installation.

No, the mobile rollformer is self powered and designed to work in most conditions without the need to plug in to secondary power.

BlueScope Lysaght has produced a clip which allows LYSAGHT KLIP-LOK 700 HI-STRENGTH® to be removed without damage. The clip also makes the sheets easier to install. For more information visit our page Major Breakthrough In Roofing Technology....

It is not recommended to unclip LYSAGHT KLIP-LOK® 406 once the cladding is installed. Unclipping can damage the clips, cladding or metallic coating on the cladding. It is difficult to assess how LYSAGHT KLIP-LOK® 406 will perform after such ...

There are clips for both metal and timber fixing. The clips for metal fixing are called metal fix clips, and have the tail of the clip bent in a 'U' shape. These are made to slide over the back edge of standard metal fascia. A clip to suit a timber ...

Yes, these are called internal or external 'mitres'.

Standing and looking toward the house, with the front of the gutter facing you, the left hand side is the left hand stop end and the right hand side is the right hand stop end.

We recommend spacing the clips approximately 1000mm apart, along the gutter.

Most fences feature galvanised steel posts and COLORBOND® steel infill sheets. Immersing the galvanised steel posts in concrete does not cause any corrosion problems but you should not allow the concrete to contact the rails or infill sheets of the...

In some states of Australia, steel roofing falls under the category of plumbing, which can only be performed by a licensed contractor. Please refer to your local authority for advice relevant to your state.