|
|
|
LYSAGHT CUSTOMSCREEN PLUS® Fencing
Product Description and Features
The modular LYSAGHT CUSTOMSCREEN PLUS® is one of the most versatile and durable fencing systems you can buy. The COLORBOND® steel finish with corrugated CUSTOM ORB® panels provides strength and simple assembly. The fence is complemented by an attractive steel lattice and ball post caps to create a dramatic finish.
- Posts, rails and panel colours can be mixed and matched for attractive combinations
- Total component system means quick and simple installation
- Gate kits are also available to match. Note: Low maintenance
- Termite and rot resistant
- May be stepped or raked on sloping ground
- Attractive steel lattice and ball post caps create a dramatic finish
Note:
- Available in SA and QLD only
- Should not be used within 1 km of salt marine locations, severe industrial or unusually corrosive environments
- Check local council regulations for use around pool areas
- Should not be used in the pool splash zone
- Garden chemicals should not come in contact with fencing
- Bottom rail should be kept clear of debris
- Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel.
Brochures
LYSAGHT® Fencing and Gate Installation Guide for Non-Cyclonic Regions
- Download Now (986 KB)
This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"
Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.
Fields marked with * are required
I've heard that COLORBOND® steel should not be immersed in concrete. How will this affect my LYSAGHT® fence posts?
Most fences feature galvanised steel posts and COLORBOND® steel infill sheets. Immersing the galvanised steel posts in concrete does not cause any corrosion problems but you should not allow the concrete to contact the rails or infill sheets of the fence. Check with your fencing supplier.
What do I do if my LYSAGHT® fence gets scratched? Will scratches lead to corrosion?
It is best not to touch up minor damage, such as scratches, with paint. Minor scratches will not affect the performance of your fence because the galvanised and aluminium/zinc coatings effectively protect any cut edges or scratches from corrosion.
Can I use LYSAGHT® fencing in a saltwater environment near the ocean?
COLORBOND® steel fences should not be installed within 1 kilometre of marine, severe industrial or other corrosive environments.
Can LYSAGHT® fencing be used as a retaining wall?
No. LYSAGHT® fencing has not been designed or tested for use in this application. It is highly likely the soil will cause corrosion of the COLORBOND® steel.
Can I overpaint my COLORBOND® steel fence?
Yes. Overpainting instructions are available from any BlueScope Lysaght office. However, please be aware that painting will void the warranty on the fence. Download Technical Bulletin TB 02 - Overpainting and Restoration of COLORBOND® prepainted steel sheet (224 KB)
Do LYSAGHT® fences meet the relevant Australian standards?
Yes. We have fully tested and evaluated our fence systems both in our NATA registered laboratory and using the latest computer modelling software. We can certify that they meet all relevant Australian Standards, including AS1538-1988 (Cold Formed Structures) & AS1170.2 (Wind Loading Code).
Can I use COLORBOND® steel fencing around my pool?
You should check with your local council for regulations on fences around pool areas. Particular care needs to be taken if COLORBOND® steel is to be installed within the 'splash zone'. Both salt and chlorine may have a corrosive effect on the COLORBOND® steel finish and as such, may negate a warranty claim.
For more information Download Corrosion Technical Bulletin CTB 21 - Special Service Environments: Enclosed Swimming Pool Buildings (230 KB)For full details on design and installation Download LYSAGHT® Steel Fences - Selection and Installation Guide for Non-Cyclonic Regions (1612 KB)
Sizes
The nominal heights of fences are 1500, 1800 and 2100mm from top rail to bottom rail. The bottom rail should be nominally 50mm above ground level.
Standard panel widths are 2350mm from post to post.
Material Specifications
- ZINCALUME® made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels)
- ZINC HI-TEN® made from zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels), or zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- The fence panel base metal thickness is 0.35mm
Product Specification
Availability
| NSW/ ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Not Avail. | Not Avail. | Not Avail. | Avail. | Not Avail. | Avail. | Not Avail. |
Colour Range
LYSAGHT CUSTOMSCREEN® Fencing range is available in the standard range of COLORBOND® steel for Fencing colours and in unpainted ZINCALUME® steel.
Please check with your local supplier regarding specific colour availability for this product.
Brochures
LYSAGHT® Fencing and Gate Installation Guide for Non-Cyclonic Regions
- Download Now (986 KB)
FAQs
I've heard that COLORBOND® steel should not be immersed in concrete. How will this affect my LYSAGHT® fence posts?
Most fences feature galvanised steel posts and COLORBOND® steel infill sheets. Immersing the galvanised steel posts in concrete does not cause any corrosion problems but you should not allow the concrete to contact the rails or infill sheets of the fence. Check with your fencing supplier.
What do I do if my LYSAGHT® fence gets scratched? Will scratches lead to corrosion?
It is best not to touch up minor damage, such as scratches, with paint. Minor scratches will not affect the performance of your fence because the galvanised and aluminium/zinc coatings effectively protect any cut edges or scratches from corrosion.
Can I use LYSAGHT® fencing in a saltwater environment near the ocean?
COLORBOND® steel fences should not be installed within 1 kilometre of marine, severe industrial or other corrosive environments.
Can LYSAGHT® fencing be used as a retaining wall?
No. LYSAGHT® fencing has not been designed or tested for use in this application. It is highly likely the soil will cause corrosion of the COLORBOND® steel.
Can I overpaint my COLORBOND® steel fence?
Yes. Overpainting instructions are available from any BlueScope Lysaght office. However, please be aware that painting will void the warranty on the fence. Download Technical Bulletin TB 02 - Overpainting and Restoration of COLORBOND® prepainted steel sheet (224 KB)
Do LYSAGHT® fences meet the relevant Australian standards?
Yes. We have fully tested and evaluated our fence systems both in our NATA registered laboratory and using the latest computer modelling software. We can certify that they meet all relevant Australian Standards, including AS1538-1988 (Cold Formed Structures) & AS1170.2 (Wind Loading Code).
Can I use COLORBOND® steel fencing around my pool?
You should check with your local council for regulations on fences around pool areas. Particular care needs to be taken if COLORBOND® steel is to be installed within the 'splash zone'. Both salt and chlorine may have a corrosive effect on the COLORBOND® steel finish and as such, may negate a warranty claim.
For more information Download Corrosion Technical Bulletin CTB 21 - Special Service Environments: Enclosed Swimming Pool Buildings (230 KB)Design
For full details on design and installation Download LYSAGHT® Steel Fences - Selection and Installation Guide for Non-Cyclonic Regions (1612 KB)
Specifications
Sizes
The nominal heights of fences are 1500, 1800 and 2100mm from top rail to bottom rail. The bottom rail should be nominally 50mm above ground level.
Standard panel widths are 2350mm from post to post.
Material Specifications
- ZINCALUME® made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels)
- ZINC HI-TEN® made from zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels), or zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- The fence panel base metal thickness is 0.35mm
Product Specification
Availability
Availability
| NSW/ ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Not Avail. | Not Avail. | Not Avail. | Avail. | Not Avail. | Avail. | Not Avail. |
Colour Range
LYSAGHT CUSTOMSCREEN® Fencing range is available in the standard range of COLORBOND® steel for Fencing colours and in unpainted ZINCALUME® steel.
Please check with your local supplier regarding specific colour availability for this product.
