|
|
|
Type 3 NEETASCREEN® Fencing - Far North Queensland
Product Description and Features
The modular LYSAGHT Type 3 NEETASCREEN® fence is one of the most versatile and durable fencing systems you can buy. The COLORBOND® prepainted steel finish with vertical ribbed LYSAGHT TRIMWALL® panels provide strength and simple assembly.
LYSAGHT Type 3 NEETASCREEN® fences are specifically designed not to fly apart during a cyclone. This means they are much safer than standard fences. However, cyclonic wind conditions can be so extreme that LYSAGHT Type 3 NEETASCREEN® fences cannot be guaranteed to survive a cyclone. Gates and their installation must be engineered for each individual application.
- Posts, rails and panel colours can be mixed and matched for attractive combinations
- Total component system means quick and simple installation
- Termite and rot resistant
- May be stepped or raked on sloping ground
Note:
- Cyclonic wind conditions can be so extreme that LYSAGHT Type 3 NEETASCREEN® fences cannot be guaranteed to survive a cyclone
- Gates and their installation must be engineered for each individual application
- Available in Far North Queensland only
- Should not be used within 1 km of salt marine locations, severe industrial or unusually corrosive environments
- Check local council regulations for use around pool areas
- Should not be used in the pool splash zone
- Garden chemicals should not come in contact with fencing
- Bottom rail should be kept clear of debris
- Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel.
Brochures
LYSAGHT NEETASCREEN® Type 3 Fence - Fence Installation for Cyclonic Regions
- Download Now (453 KB)
This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"
Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.
Fields marked with * are required
What components do I need to make up one LYSAGHT Type 3 NEETASCREEN® fence panel?
For a Type 3 NEETASCREEN® fence you will need:
2 standard posts, 2 standard post stiffeners, 2 NEETASCREEN® universal rails, 2 NEETASCREEN® infill sheets (1575 mm), 1 LYSAGHT® post cap, 14 self-drilling hex. head screws 10-16 x 16, 16 self-drilling hex. head screws 12-14 x 45, and 4 self-drilling hex. head long shank screws 12-24 x 32.
For a Type 3 NEETASCREEN PLUS® Fence you will need:
2 standard posts, 2 standard post stiffeners, 3 NEETASCREEN® universal rails, 2 NEETASCREEN® infill sheets (1575 mm), 1 lattice (1575 mm), 24 self-drilling hex. head screws 10-16 x 16, 16 self-drilling hex. head screws 12-14 x 45, 4 Super Teks Series 500 screws 12-24 x 32 and an optional post cover strip.
Are detailed installation instructions available for LYSAGHT Type 3 NEETASCREEN® fences?
Yes, the instructions for installing a LYSAGHT Type 3 NEETASCREEN® fence can be downloaded in our brochure.
Download LYSAGHT Type 3 NEETASCREEN® Cyclonic Fencing (312 KB)
I've heard that COLORBOND® steel should not be immersed in concrete. How will this affect my LYSAGHT® fence posts?
Most fences feature galvanised steel posts and COLORBOND® steel infill sheets. Immersing the galvanised steel posts in concrete does not cause any corrosion problems but you should not allow the concrete to contact the rails or infill sheets of the fence. Check with your fencing supplier.
What do I do if my LYSAGHT® fence gets scratched? Will scratches lead to corrosion?
It is best not to touch up minor damage, such as scratches, with paint. Minor scratches will not affect the performance of your fence because the galvanised and aluminium/zinc coatings effectively protect any cut edges or scratches from corrosion.
Can I use LYSAGHT® fencing in a saltwater environment near the ocean?
COLORBOND® steel fences should not be installed within 1 kilometre of marine, severe industrial or other corrosive environments.
Can LYSAGHT® fencing be used as a retaining wall?
No. LYSAGHT® fencing has not been designed or tested for use in this application. It is highly likely the soil will cause corrosion of the COLORBOND® steel.
Can I use COLORBOND® steel fencing around my pool?
You should check with your local council for regulations on fences around pool areas. Particular care needs to be taken if COLORBOND® steel is to be installed within the 'splash zone'. Both salt and chlorine may have a corrosive effect on the COLORBOND® steel finish and as such, may negate a warranty claim.
For more information Download Corrosion Technical Bulletin CTB 21 - Special Service Environments: Enclosed Swimming Pool Buildings (230 KB)How do I maintain my fence made from COLORBOND® steel to ensure long life?
Your fence is very easy to maintain. Here's a few tips to make sure it keeps looking great.
- Wipe or hose it down regularly – at least once every six months or more if you live in a coastal area (water restrictions permitting). Pay particular attention to cleaning dirt or debris from under the top rail where rain doesn’t naturally wash.
- Remove cobwebs using a soft broom. This will deal with any spiders.
- Don’t let soil, dirt and garden debris build up at the base of the fence or next to the posts and rails. This will retain water and can lead to corrosion.
- Be careful not to spray the fence with garden chemical sprays or fertilisers as these can damage the surface. If this happens, wash the fence down with water immediately.
- Don’t use your fence as a retaining wall. It isn’t designed for this purpose.
Sizes
The nominal heights of fences are 1500 and 1800mm from top rail to bottom rail. The bottom rail should be nominally 50mm above ground level.
Standard panel widths are 1582mm from post to post.
Material Specifications
- ZINCALUME® made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels)
- ZINC HI-TEN® made from zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels), or zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- The fence panel base metal thickness is 0.35mm
Components
 |
 |
Infill sheet profile
Availability
| NSW/ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Not Avail. | Not Avail. | Not Avail. | Avail.* | Not Avail. | Not Avail. | Not Avail. |
*Please contact our sales office on 13 30 38 for availability in your area.
Colour Range
LYSAGHT Type 3 NEETASCREEN® Fencing is available in the standard range of COLORBOND® steel for Fencing colours and in unpainted ZINCALUME® steel.
Please check with your local supplier regarding specific colour availability for this product.
Brochures
LYSAGHT NEETASCREEN® Type 3 Fence - Fence Installation for Cyclonic Regions
- Download Now (453 KB)
FAQs
What components do I need to make up one LYSAGHT Type 3 NEETASCREEN® fence panel?
For a Type 3 NEETASCREEN® fence you will need:
2 standard posts, 2 standard post stiffeners, 2 NEETASCREEN® universal rails, 2 NEETASCREEN® infill sheets (1575 mm), 1 LYSAGHT® post cap, 14 self-drilling hex. head screws 10-16 x 16, 16 self-drilling hex. head screws 12-14 x 45, and 4 self-drilling hex. head long shank screws 12-24 x 32.
For a Type 3 NEETASCREEN PLUS® Fence you will need:
2 standard posts, 2 standard post stiffeners, 3 NEETASCREEN® universal rails, 2 NEETASCREEN® infill sheets (1575 mm), 1 lattice (1575 mm), 24 self-drilling hex. head screws 10-16 x 16, 16 self-drilling hex. head screws 12-14 x 45, 4 Super Teks Series 500 screws 12-24 x 32 and an optional post cover strip.
Are detailed installation instructions available for LYSAGHT Type 3 NEETASCREEN® fences?
Yes, the instructions for installing a LYSAGHT Type 3 NEETASCREEN® fence can be downloaded in our brochure.
Download LYSAGHT Type 3 NEETASCREEN® Cyclonic Fencing (312 KB)
I've heard that COLORBOND® steel should not be immersed in concrete. How will this affect my LYSAGHT® fence posts?
Most fences feature galvanised steel posts and COLORBOND® steel infill sheets. Immersing the galvanised steel posts in concrete does not cause any corrosion problems but you should not allow the concrete to contact the rails or infill sheets of the fence. Check with your fencing supplier.
What do I do if my LYSAGHT® fence gets scratched? Will scratches lead to corrosion?
It is best not to touch up minor damage, such as scratches, with paint. Minor scratches will not affect the performance of your fence because the galvanised and aluminium/zinc coatings effectively protect any cut edges or scratches from corrosion.
Can I use LYSAGHT® fencing in a saltwater environment near the ocean?
COLORBOND® steel fences should not be installed within 1 kilometre of marine, severe industrial or other corrosive environments.
Can LYSAGHT® fencing be used as a retaining wall?
No. LYSAGHT® fencing has not been designed or tested for use in this application. It is highly likely the soil will cause corrosion of the COLORBOND® steel.
Can I use COLORBOND® steel fencing around my pool?
You should check with your local council for regulations on fences around pool areas. Particular care needs to be taken if COLORBOND® steel is to be installed within the 'splash zone'. Both salt and chlorine may have a corrosive effect on the COLORBOND® steel finish and as such, may negate a warranty claim.
For more information Download Corrosion Technical Bulletin CTB 21 - Special Service Environments: Enclosed Swimming Pool Buildings (230 KB)How do I maintain my fence made from COLORBOND® steel to ensure long life?
Your fence is very easy to maintain. Here's a few tips to make sure it keeps looking great.
- Wipe or hose it down regularly – at least once every six months or more if you live in a coastal area (water restrictions permitting). Pay particular attention to cleaning dirt or debris from under the top rail where rain doesn’t naturally wash.
- Remove cobwebs using a soft broom. This will deal with any spiders.
- Don’t let soil, dirt and garden debris build up at the base of the fence or next to the posts and rails. This will retain water and can lead to corrosion.
- Be careful not to spray the fence with garden chemical sprays or fertilisers as these can damage the surface. If this happens, wash the fence down with water immediately.
- Don’t use your fence as a retaining wall. It isn’t designed for this purpose.
Design
Specifications
Sizes
The nominal heights of fences are 1500 and 1800mm from top rail to bottom rail. The bottom rail should be nominally 50mm above ground level.
Standard panel widths are 1582mm from post to post.
Material Specifications
- ZINCALUME® made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels)
- ZINC HI-TEN® made from zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels), or zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- The fence panel base metal thickness is 0.35mm
Components
|
|
Infill sheet profile
Availability
Availability
| NSW/ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Not Avail. | Not Avail. | Not Avail. | Avail.* | Not Avail. | Not Avail. | Not Avail. |
*Please contact our sales office on 13 30 38 for availability in your area.
Colour Range
LYSAGHT Type 3 NEETASCREEN® Fencing is available in the standard range of COLORBOND® steel for Fencing colours and in unpainted ZINCALUME® steel.
Please check with your local supplier regarding specific colour availability for this product.
