|
|
|
|
|
|
LYSAGHT ROOFTRAK®
Product Description and Features
LYSAGHT ROOFTRAK® is a safe, stable, slip resistant walkway system for incidental access to roof-mounted equipment and services. It is laid on top of steel roofing with brackets designed for application to various roof cladding profiles.
- Can be laid parallel or 90 degrees to the ribs of roofing sheets
- Simple to install
- Corrosion resistant
- Flexible in layout
- Light for easy handling
- Anti-skid, self draining surface
This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"
Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.
Fields marked with * are required
You may choose to Search for Supplier by Name
Lengths and Tolerance
Stock lengths: 3018mm and 6075mm; +0mm, -6mm
Depth: +1mm, -1mm
Width: +0mm, -2mm
Material Specification
The planks of ROOFTRAK® are made from galvanised BlueScope Lysaght ZINCFORM® steel conforming to AS1397-2001, grade G300, Z450 (300MPa minimum yield stress, 450g/m² minimum coating mass), with a base metal thickness of 1.2 mm (2.0 mm is subject to enquiry).
LYSAGHT ROOFTRAK® walkways may be used in cyclonic and non-cyclonic areas. For use in cyclonic areas the roof cladding must also be fixed in accordance with our Cyclonic area design manual for steel roofing and walling.
Australian Standard 1657-1992 allows a maximum slope of 20 degrees along cleated or grated walkways. For ROOFTRAK® installed at 90 degrees to the ribs, the side slope (pitch of roof) should not exceed 5 degrees.
The roof supporting LYSAGHT ROOFTRAK® must be verified to have sufficient capacity to withstand all the additional loads.
For LYSAGHT ROOFTRAK® 450 applications, approval from regulatory authorities must be obtained as it is narrower than the minimum provided for in AS 1657-1992.
Alternative Claddings
LYSAGHT ROOFTRAK® can be used with a range of claddings. When used with LYSAGHT KLIP-LOK 700 HI-STRENGTH® and oriented in the same direction as the cladding, an additional stiffening plate must be included.
Configurations
ROOFTRAK® is supplied in kits that include components and fixings. The basic ROOFTRAK® "plank" is 224mm wide. The ROOFTRAK® 450 system uses two planks (total 450mm wide); ROOFTRAK® 675 uses three planks (total 675mm wide). For further details of the kits available, Download LYSAGHT ROOFTRAK® Roof Walkway System (1701 KB)
Schematic
Availability
| NSW/ ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Avail. | Avail. | Avail. | Avail. | By Enquiry* | Avail. | Avail. |
*Please contact our sales office on 13 30 38 for availability
Colour Range
The planks of ROOFTRAK® are available in galvanised ZINCFORM® steel.
Specification
Lengths and Tolerance
Stock lengths: 3018mm and 6075mm; +0mm, -6mm
Depth: +1mm, -1mm
Width: +0mm, -2mm
Material Specification
The planks of ROOFTRAK® are made from galvanised BlueScope Lysaght ZINCFORM® steel conforming to AS1397-2001, grade G300, Z450 (300MPa minimum yield stress, 450g/m² minimum coating mass), with a base metal thickness of 1.2 mm (2.0 mm is subject to enquiry).
LYSAGHT ROOFTRAK® walkways may be used in cyclonic and non-cyclonic areas. For use in cyclonic areas the roof cladding must also be fixed in accordance with our Cyclonic area design manual for steel roofing and walling.
Australian Standard 1657-1992 allows a maximum slope of 20 degrees along cleated or grated walkways. For ROOFTRAK® installed at 90 degrees to the ribs, the side slope (pitch of roof) should not exceed 5 degrees.
The roof supporting LYSAGHT ROOFTRAK® must be verified to have sufficient capacity to withstand all the additional loads.
For LYSAGHT ROOFTRAK® 450 applications, approval from regulatory authorities must be obtained as it is narrower than the minimum provided for in AS 1657-1992.
Alternative Claddings
LYSAGHT ROOFTRAK® can be used with a range of claddings. When used with LYSAGHT KLIP-LOK 700 HI-STRENGTH® and oriented in the same direction as the cladding, an additional stiffening plate must be included.
Configurations
ROOFTRAK® is supplied in kits that include components and fixings. The basic ROOFTRAK® "plank" is 224mm wide. The ROOFTRAK® 450 system uses two planks (total 450mm wide); ROOFTRAK® 675 uses three planks (total 675mm wide). For further details of the kits available, Download LYSAGHT ROOFTRAK® Roof Walkway System (1701 KB)
Schematic
Availability
Availability
| NSW/ ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Avail. | Avail. | Avail. | Avail. | By Enquiry* | Avail. | Avail. |
*Please contact our sales office on 13 30 38 for availability
Colour Range
The planks of ROOFTRAK® are available in galvanised ZINCFORM® steel.
