LYSAGHT® Zed & Cee Purlins and Girts

Product Description and Features

LYSAGHT® Purlins and Girts are lightweight structural steel members, designed in accordance with the AS/NZS 4600: 1996 Cold Formed Steel Structures utilising high strength zinc-coated steel.

LYSAGHT® Zed sections may be used over single spans, unlapped and lapped continuous spans in multi-bay buildings. Lapped continuous spans result in considerable capacity increase in the system.

LYSAGHT® Cee sections may be used in single spans, and unlapped continuous spans in multi-bay building and are ideal as eave purlins or where compact sections are required for detailing.

• A range of gauges and depths are available
• Can be provided punched and unpunched
• Non-standard sizes may be available on application
• A down-turned bottom lip on your LYSAGHT® Zed Purlin, is available on request.

Note:

• LYSAGHT® Cee sections cannot be lapped
• Cee and Zed purlins are normally supplied un-punched. If punching is required punching details should be specified at the time of ordering
• Purlins should be stored off the ground and on a slight slope so that water can drain away
• Direct contact of incompatible material with coating should be avoided. In such applications, suitable paint systems should be obtained from paint manufacturers
• Consider orientation of Zed and Cee purlins in relation to possible build-up of substances such as dust or grain
• Special transport requirements are needed for lengths over 12000mm
• Span tables assume the use of LYSAGHT® bridging and LYSAGHT® recommended bolts

This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"

Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.

Fields marked with * are required

Span  Tables

Limit State Capacity tables for different purlin configurations can be found in the user manual. Download LYSAGHT® Zed & Cee Purlins and Girts User Manual (3575 KB).

NOTE: New South Wales designers must refer to the New South Wales LYSAGHT SupaZed® and LYSAGHT SupaCee® Purlins and Girts Range.

Holes and Cleats

Zed and Cee sections are normally supplied with holes punched to the Australian Institute of Steel Construction (AISC) gauge lines, except in Victoria where the 150 series sections are punched to the Structural Steel Fabricators Association, Victoria, recommended gauge lines.

 

a

Specification

LYSAGHT® Zed and Cee sections are roll-formed from GALVASPAN® steel complying with AS1397 - 1993. In the grades shown, the numbers prefixed with G indicate minimum yield stress in MPa. The numbers prefixed with Z indicate minimum coating mass in g/m².

1.0mm BMT: G550, Z350*
1.2mm BMT: G500, Z350*
1.5, 1.9, 2.4 & 3.0 mm BMT: G450, Z350*

* All BMTs in Townsville have Z450 coating.

Section Properties

Section properties for different purlin configurations can be found in the downloadable manual. Download LYSAGHT® Zed & Cee Purlins and Girts User Manual (3575 KB).

NOTE: New South Wales designers must refer to the New South Wales LYSAGHT SupaZed® and LYSAGHT SupaCee® Purlins and Girts Range.

Schematic

 

Disclaimer

 

 

Availability

	NSW4	WA3	SA/NT	QLD	VIC/TAS
C 75	-	-	Yes (SA Only5)	-	-
C/Z 100	Yes	Yes	Yes	Yes	Yes
C/Z 150	-	Yes	Yes	Yes	Yes
C/Z 200	-	Yes	Yes	Yes	Yes
C/Z 250	-	C 250 yes (Z2501)	Yes2	Yes	Yes
C/Z 300	-	Yes	Yes2	Yes1	Yes1
C/Z 350	-	Yes	Yes2	Yes1	Yes1

¹ Extended lead times may apply. Contact your local service centre for availability
² Price and availability subject to application. Extended lead times apply. Contact your nearest Lysaght service centre for availability.
³ A turn down lip is available on C/Z 150, C/Z 200, and C 250 purlins. Minimum order quantities are required.
⁴ For purlin availability in New South Wales, please see LYSAGHT SupaZed® and LYSAGHT SupaCee® Purlins and Girts
⁵ C 75 is only available in South Australia, and you can Download Section Properties for the South Australian Purlin; LYSAGHT Cee Purlin C7510 (216 KB)

Other purlin profiles may be available subject to application and will incur added charges &/or lead times.