LYSAGHT EASYCLAD®

Product Description and Features

The LYSAGHT EASYCLAD® wall cladding is a stylish solution for both interior and exterior steel walling applications. Simple clips are used for fixing the start of the first sheet, subsequent sheets are nailed or screwed.

  • Can be used for walls, ceilings, infill panels and sections
  • Versatile panels can run vertically or horizontally
  • Wide range of trim sections and accessories
  • High impact resistance due to profile strength
  • Panels can run vertically or horizontally.
Note:

Brochures

LYSAGHT® Walling Solutions

Lysaght

Important product update

Release date 1 August 2013

Following BlueScope’s launch of next generation ZINCALUME® steel, Lysaght has commenced supplying our unpainted product range using next generation ZINCALUME® steel AM125 where previously original ZINCALUME® steel AZ150 would have been used . Next generation ZINCALUME® steel AM125 is guaranteed by BlueScope to meet AS1397 and the ‘deemed to satisfy’ requirements of the Building Code of Australia for applications such as roofing and walling.

We are currently updating the Lysaght website and brochures to reflect this change. In the meantime, where the enclosed literature makes reference to ZINCALUME® the reader should note that this may refer to the previous version of the product.

Due to its increased corrosion performance compared to original ZINCALUME® steel AZ150, roofing applications made from next generation ZINCALUME® steel AM125 will be backed by an improved warranty of up to 36 years.*

*For full terms and conditions and to determine the eligibility of your project for the warranty visit www.bluescopesteel.com.au/warranties or call BlueScope on 1800 022 999

For further information on next generation ZINCALUME® steel visit http://www.nextgenzincalume.com.au.

Download Now

LYSAGHT® Roof & Wall Flashing - Architectural Detailing Manual

LYSAGHT EASYCLAD® CAD File dxf

This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"

Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.

Fields marked with * are required

Span Tables and Capacity & Load Tables

Span Tables and limit state wind pressure capacity table can be viewed in the LYSAGHT Walling Solutions brochure. Download LYSAGHT® Walling Solutions (3779 KB)

This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.

Lengths

Sheets are supplied custom cut.

Tolerances

Length Tolerance: +0mm, -15mm
Width Tolerance: +1.5mm, -1.5mm

Material Specification

  • Next generation ZINCALUME® aluminium/zinc/ magnesium alloy coated steel complies with AS 1397:2011 G550, AM125 (550 MPa minimum yield stress, 125 g/m2 minimum coating mass)
  • COLORBOND® is prepainted steel for exterior roofing and walling. It is the most widely used. The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc alloy-coated steel complying with AS 1397:2011. Minimum yield strength is G550 (550MPa). Minimum coating mass is AM100 (100g/m2)
  • COLORBOND® Metallic is prepainted steel for superior aesthetic qualities displaying a metallic sheen.
  • COLORBOND® Ultra is prepainted steel for severe coastal or industrial environments (generally within about 100-200 metres of the source). The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc alloycoated steel complying with AS 1397:2011. Minimum yield strength is G550 (550MPa). Minimum coating mass is AM150 (150g/m2)

Mass (COLORBOND® steel)

BMT: 0.42mm, 4.5kg/m2

Schematic

LYSAGHT EASYCLAD® 2PF300 Dimensions

 

Disclaimer

Availability

NSW/
ACT
VICTASQLDNT
EH300
SAWA
Avail. Avail. Avail. Avail. Avail. Avail. Not Avail.

*Please contact our sales office on 13 30 38 for availability.

Colour Range

LYSAGHT EASYCLAD® is available in a limited range of COLORBOND® steel colours and in unpainted ZINCALUME® steel.

Please check with your local supplier regarding specific colour availability for this product.

COLORBOND® steel colours



FAQs

Can LYSAGHT EASYCLAD® be used in a ceiling application?

Yes, it can. Consideration should be given to minimise the sag and thus the support spacing should be limited to 900mm spacing and it may be necessary to have additional fasteners in the pans.

What is the longest length of LYSAGHT EASYCLAD® that I can order?

Wall cladding profiles are not as robust as roofing profiles and thus need to be limited in length to minimise the possibility of damage due to handling. Thus the length available in LYSAGHT EASYCLAD® is limited to 9000mm.


Design

Span Tables and Capacity & Load Tables

Span Tables and limit state wind pressure capacity table can be viewed in the LYSAGHT Walling Solutions brochure. Download LYSAGHT® Walling Solutions (3779 KB)

This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.

Specifications

Lengths

Sheets are supplied custom cut.

Tolerances

Length Tolerance: +0mm, -15mm
Width Tolerance: +1.5mm, -1.5mm

Material Specification

  • Next generation ZINCALUME® aluminium/zinc/ magnesium alloy coated steel complies with AS 1397:2011 G550, AM125 (550 MPa minimum yield stress, 125 g/m2 minimum coating mass)
  • COLORBOND® is prepainted steel for exterior roofing and walling. It is the most widely used. The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc alloy-coated steel complying with AS 1397:2011. Minimum yield strength is G550 (550MPa). Minimum coating mass is AM100 (100g/m2)
  • COLORBOND® Metallic is prepainted steel for superior aesthetic qualities displaying a metallic sheen.
  • COLORBOND® Ultra is prepainted steel for severe coastal or industrial environments (generally within about 100-200 metres of the source). The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc alloycoated steel complying with AS 1397:2011. Minimum yield strength is G550 (550MPa). Minimum coating mass is AM150 (150g/m2)

Mass (COLORBOND® steel)

BMT: 0.42mm, 4.5kg/m2

Schematic

LYSAGHT EASYCLAD® 2PF300 Dimensions

 

Disclaimer

Availability

Availability

NSW/
ACT
VICTASQLDNT
EH300
SAWA
Avail. Avail. Avail. Avail. Avail. Avail. Not Avail.

*Please contact our sales office on 13 30 38 for availability.

Colour Range

LYSAGHT EASYCLAD® is available in a limited range of COLORBOND® steel colours and in unpainted ZINCALUME® steel.

Please check with your local supplier regarding specific colour availability for this product.

COLORBOND® steel colours




 
BlueScope Steel Limited
ABN 16 000 011 058
BlueScope and Lysaght
are trademarks of BlueScope Steel Limited
Australian Made Lysaght