LYSAGHT FITFAST® Gutter

Product Description and Features

LYSAGHT FITFAST® gutter suits Queensland's demanding weather, withstanding baking sun and torrential rain.The high face front also conceals the ends of roof sheeting, and is custom cut to length, leaving a neater appearance with fewer joins, which saves you time on site. The LYSAGHT FITFAST® gutter also has overflow slots helping to prevent water back up into the eaves.

• Easy installation
• Low maintenance
• Manufactured locally for quick turnaround
• Range of accessories available

Note:

• Available in Queensland only
• It is important gutters slope towards the outlets (a minimum gutter fall of 1 in 500 is recommended). Without this slope, 'ponding' may occur, reducing the life of your gutter
• When installing gutters, remove any metal particles or debris at the end of the day to prevent staining or corrosion
• Do not install galvanised gutters with a ZINCALUME® steel or COLORBOND® prepainted steel roof. Galvanised gutters are only suitable with galvanised steel roof
• The protective plastic film should be stripped off immediately on installation
• Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel.

This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"

Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.

Fields marked with * are required

Schematic

 

 

Disclaimer

 

 

 

Designing Roof Drainage

Correct design of a roof drainage system is critical to the waterproofing of a building. This is a task that should only be carried out by a suitably qualified trade professional in accordance with the BCA and Australian Standards.

In the design and detailing of a roof drainage system, consideration must be given to a range of factors such as:

• rainfall intensity
• roof catchment area
• gutter size/capacity
• gutter fall
• gutter outlets (sumps, rain heads, nozzles)
• downpipe size, quantity and placement
• overflow consideration
• material selection and
• jointing

View information on the design of roof drainage systems:

• Download LYSAGHT® Rainwater Solutions Queensland (1809 KB)
• Download Office of Fair Trading Residential Gutters Quick Reference Installation Guide (174 KB)

Downpipe Design

The downpipe size and spacing should be determined in accordance with AS/NZ3500.3.2:1998 National plumbing and drainage: Part 3.2: Stormwater drainage - Acceptable solutions.

Availability

NSW/ ACT	VIC	TAS	QLD	NT	SA	WA
Not Avail.	Not Avail.	Not Avail.	Avail.	Not Avail.	Not Avail.	Not Avail.

*Please contact our sales office on 13 30 38 for availability.

Colour Range

LYSAGHT® Half Round Gutter and LYSAGHT® Flat Back Gutter and accessories are available in ZINCALUME® steel, COLORBOND® steel, and COLORBOND® steel high gloss colours. View the COLORBOND® steel colours. For high gloss colour availability please contact your local supplier.