LYSAGHT® Half Round Gutter and
LYSAGHT® Flat Back Gutter

Product Description and Features

The LYSAGHT® Half Round and LYSAGHT® Flat Back style gutters have been designed with a unique curved base which can prevent build-up of water and dirt, allowing the gutter to clean itself with every shower of rain.

• LYSAGHT® Half Round gutter is available with external brackets only
• LYSAGHT® Flat Back gutter uses internal brackets only
• Large water carrying capacity gutter with overflow slots in the design, specifically for the tropics. Available unslotted on request
• Range of easy fix accessories and brackets, makes installation easier

Note:

• Styles and dimensions vary for each state, see availability tables
• It is important gutters slope towards the outlets (a minimum gutter fall of 1 in 500 is recommended). Without this slope, 'ponding' may occur, reducing the life of your gutter
• When installing gutters, remove any metal particles or debris at the end of the day to prevent staining or corrosion
• Do not install galvanised gutters with a ZINCALUME® steel or COLORBOND® prepainted steel roof. Galvanised gutters are only suitable with galvanised steel roof
• The protective plastic film should be stripped off immediately on installation
• Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel.

This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"

Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.

Fields marked with * are required

Sizes & Lengths

Half round gutter is a simple profile, supported by external brackets. Ideal for tropical environments with huge water carrying capacity. Self cleaning with every shower of rain.

Available in 3000mm and 6000mm lengths only, subject to enquiry.

	Dimensions
	State	B(mm)	Material
	QLD	150	ZINCALUME® steel & COLORBOND® steel
	VIC	149	ZINCALUME® steel & COLORBOND® steel
	SA	150	ZINCALUME® steel, COLORBOND® steel & GALVABOND® steel
	NSW	100, 125, 200, 250, 300	ZINCALUME® steel & COLORBOND® steel
	NSW	Half Round 150 Gutter	ZINCALUME® steel & COLORBOND® steel
	WA		ZINCALUME® steel, COLORBOND® steel, COLORBOND® Stainless steel, COLORBOND® Metallic steel, copper, aluminium and hard zinc.

LYSAGHT® Flat Back gutter (Available Nth Qld, NSW, SA only)

	Dimensions
	State	x(mm)	Material
	QLD	136	ZINCALUME® steel & COLORBOND® steel
	SA	150	ZINCALUME® steel, COLORBOND® steel & GALVABOND® steel
	NSW Flat Back 150 Gutter		ZINCALUME® steel & COLORBOND® steel

LYSAGHT® Quarter Round (Available in WA only)

LYSAGHT® NSW Half Round 150 Gutter Accessories	Description
	Stop Ends
	External Brackets
	2 Piece Cast External Corners 90°
	2 Piece Cast External Corners 45°
	2 Piece Cast Internal Corners 90°
	2 Piece Cast Internal Corners 45°

LYSAGHT® NSW Flat Back 150 Gutter Accessories	Description
	Stop Ends
	Concealed Suspension Bracket (Flat Back general purpose bracket)
	Overstraps
	2 Piece Cast External Corners 90°
	2 Piece Cast External Corners 45°
	2 Piece Cast Internal Corners 90°
	2 Piece Cast Internal Corners 45°

LYSAGHT® NSW Flat Back 150 and Half Round Gutter 150 Sculptured Nozzles

 

 

Disclaimer

Availability

NSW/ ACT	VIC	TAS	QLD	NT	SA	WA
Avail.**	Avail.	Avail.	Avail.	Not Avail.	Avail.	Avail.*

*Please contact our sales office on 13 30 38 for availability.

** LYSAGHT® Half Round and Flat Back 150 gutters are available in NSW. There are additional sizes outside of this range, please contact your local sales office on 13 30 38 for regional availability.

Colour Range

LYSAGHT® Half Round Gutter and LYSAGHT® Flat Back Gutter and accessories are available in ZINCALUME® steel, COLORBOND® steel, and COLORBOND® steel high gloss colours. View the COLORBOND® steel colours. For high gloss colour availability please contact your local supplier.

LYSAGHT® Half Round and Flat Back 150 gutter is available in NSW in ZINCALUME® steel and standard COLORBOND® steel colours.

Designing Roof Drainage

Correct design of a roof drainage system is critical to the waterproofing of a building. This is a task that should only be carried out by a suitably qualified trade professional in accordance with the BCA and Australian Standards.

In the design and detailing of a roof drainage system, consideration must be given to a range of factors such as:

• rainfall intensity
• roof catchment area
• gutter size/capacity
• gutter fall
• gutter outlets (sumps, rain heads, nozzles)
• downpipe size, quantity and placement
• overflow consideration
• material selection and
• jointing

View information on the design of roof drainage systems:

• Download LYSAGHT® Rainwater Solutions Queensland (1809 KB)
• Download LYSAGHT® Rainwater Solutions New South Wales (1647 KB)
• Download LYSAGHT® Rainwater Solutions Victoria, Tasmania (1658 KB)
• Download LYSAGHT® Rainwater Solutions South Australia (1992 KB)
• Download LYSAGHT® Rainwater Solutions Western Australia (1785 KB)
• Download Office of Fair Trading Residential Gutters Quick Reference Installation Guide (174 KB)

Downpipe Design

The downpipe size and spacing should be determined in accordance with AS/NZ3500.3.2:1998 National plumbing and drainage: Part 3.2: Stormwater drainage - Acceptable solutions.