LYSAGHT NOVALINE® Fascia System

Product Description and Features

LYSAGHT NOVALINE® Fascia System has been designed for ease of use.  A spring clip snaps on to the LYSAGHT NOVALINE® Fascia and makes fixing of the gutters quick and easy. It is available in custom cut lengths to suit your application.

• Available in a range of COLORBOND® steel colours to suit your needs
• Custom cut to prevent waste, which gives extra savings
• Designed to integrate perfectly with LYSAGHT® gutters
• Performance backed by BlueScope Lysaght.

Note:

• It is important gutters slope towards the outlets (a minimum gutter fall of 1 in 500 is recommended). Without this slope, 'ponding' may occur, reducing the life of your gutter
• When installing gutters, remove any metal particles or debris at the end of the day to prevent staining or corrosion
• Do not install galvanised gutters with a ZINCALUME® steel or COLORBOND® prepainted steel roof. Galvanised gutters are only suitable with galvanised steel roof
• The protective plastic film should be stripped off immediately on installation
• Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel.

This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"

Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.

Fields marked with * are required

Schematic

		NOVALINE® Rebate Fascia WA Only

 

 

Components

The LYSAGHT NOVALINE® is a fascia system that integrates with most of our gutters. It comprises:

• The Fascia
• Metal Fixing Brackets
• One of Many Gutters
• Spring clips that fastens the gutter to the fascia
• Overstraps to suit the chosen gutter

Compatible Gutters

• LYSAGHT EMLINE®
• LYSAGHT® QUAD 115 Hi-front
• LYSAGHT® QUAD 115 Low-front
• LYSAGHT® QUAD 125
• LYSAGHT® QUAD 150
• LYSAGHT OGEE®
• LYSAGHT TRIMLINE®

Disclaimer

Availability

Colour Range

LYSAGHT NOVALINE® Fascia System and accessories are available in ZINCALUME® steel, COLORBOND® steel, and COLORBOND® steel high gloss colours. View the COLORBOND® steel colours. For high gloss colour availability please contact your local supplier.

Designing Roof Drainage

Correct design of a roof drainage system is critical to the waterproofing of a building. This is a task that should only be carried out by a suitably qualified trade professional in accordance with the BCA and Australian Standards.

In the design and detailing of a roof drainage system, consideration must be given to a range of factors such as:

• rainfall intensity
• roof catchment area
• gutter size/capacity
• gutter fall
• gutter outlets (sumps, rain heads, nozzles)
• downpipe size, quantity and placement
• overflow consideration
• material selection and
• jointing

View information on the design of roof drainage systems by downloading the brochure for your state:

• Download LYSAGHT® Rainwater Solutions Queensland (1809 KB)
• Download LYSAGHT® Rainwater Solutions New South Wales (1647 KB)
• Download LYSAGHT® Rainwater Solutions Victoria, Tasmania (1658 KB)
• Download LYSAGHT® Rainwater Solutions South Australia (1992 KB)
• Download LYSAGHT® Rainwater Solutions Western Australia (1785 KB)
• Download Office of Fair Trading Residential Gutters Quick Reference Installation Guide (174 KB)

Downpipe Design

The downpipe size and spacing should be determined in accordance with AS/NZ3500.3.2:1998 National plumbing and drainage: Part 3.2: Stormwater drainage - Acceptable solutions.