LYSAGHT® PATIO POST

Product Description and Features

The LYSAGHT® Patio Post is an attractive post designed for maximum visual impact and structural strength. The post is made from extruded aluminium and features a fluted profile and high gloss powder-coated finish.  The posts sit neatly on die-cast aluminium feet which are easily fastened to concrete slabs or footings. 

  • High gloss paint finish
  • Corrosion resistant extruded aluminium
  • Attractive, profiled cross section
  • Available in 2 stock lengths: 2400 & 3000mm
Note:
  • Do not allow the LYSAGHT® Patio Post to make long term contact with lead, copper, bare steel or most green or chemically treated timbers
  • Do not allow rainwater run-off from these products to flow over the LYSAGHT® Patio Post or it's components
  • Supporting members should be coated to avoid undesired condensation
  • Use only neutral cure silicone sealants

Brochures

LYSAGHT® PATIO POST

Lysaght

Important product update

Release date 1 August 2013

Following BlueScope’s launch of next generation ZINCALUME® steel, Lysaght has commenced supplying our unpainted product range using next generation ZINCALUME® steel AM125 where previously original ZINCALUME® steel AZ150 would have been used . Next generation ZINCALUME® steel AM125 is guaranteed by BlueScope to meet AS1397 and the ‘deemed to satisfy’ requirements of the Building Code of Australia for applications such as roofing and walling.

We are currently updating the Lysaght website and brochures to reflect this change. In the meantime, where the enclosed literature makes reference to ZINCALUME® the reader should note that this may refer to the previous version of the product.

Due to its increased corrosion performance compared to original ZINCALUME® steel AZ150, roofing applications made from next generation ZINCALUME® steel AM125 will be backed by an improved warranty of up to 36 years.*

*For full terms and conditions and to determine the eligibility of your project for the warranty visit www.bluescopesteel.com.au/warranties or call BlueScope on 1800 022 999

For further information on next generation ZINCALUME® steel visit http://www.nextgenzincalume.com.au.

Download Now

This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"

Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.

Fields marked with * are required

Capacity & Load Tables

Wind Category N1 (W28N) N2 (W33N) N3 (W41N) N4(W50N)
Maximum allowable area of roof per post (m2). Governing factor is uplift force of 14 kN. 21.2m2 15.5m2 10.3m2 7.0m2

Maximum Uplift Forces

  • Sustainable by foot (as detailed with two M10 Dynabolts): 18kN
  • Sustainable by head with one central M8 bolt in slotted hole: 14 kN (as detailed with four 10-16x16 screws)

Greater uplift forces can be sustained at the 'head-to-post' connection by fixing LYSAGHT FIRMLOK™ beams to posts with LYSAGHT FIRMLOK™ Universal Brackets. Forces will depend on the number of screws used. see Download LYSAGHT FIRMLOK™ Beams Quick Selection Tables for Home Improvements (811 KB)

 

 

 

Lengths

Available in two stock lengths: 2400mm and 3000mm.

Specification

Wall Thickness Area Weight Temper Moments of inertis
1.6 mm 453.29 mm2 1.230 kg/m T5 lxx = lyy = 0.292 x 106 mm4

Availability

NSW/
ACT
VICTASQLDNTSAWA
Avail. Avail. Avail. Avail. Not Avail. Not Avail. Not Avail.


Colour Range

 NSW QLD
To match Paperbark® yes yes
To match Dover White
yes yes
To match Classic Cream™
yes yes
Unpainted yes  

Design

Capacity & Load Tables

Wind Category N1 (W28N) N2 (W33N) N3 (W41N) N4(W50N)
Maximum allowable area of roof per post (m2). Governing factor is uplift force of 14 kN. 21.2m2 15.5m2 10.3m2 7.0m2

Maximum Uplift Forces

  • Sustainable by foot (as detailed with two M10 Dynabolts): 18kN
  • Sustainable by head with one central M8 bolt in slotted hole: 14 kN (as detailed with four 10-16x16 screws)

Greater uplift forces can be sustained at the 'head-to-post' connection by fixing LYSAGHT FIRMLOK™ beams to posts with LYSAGHT FIRMLOK™ Universal Brackets. Forces will depend on the number of screws used. see Download LYSAGHT FIRMLOK™ Beams Quick Selection Tables for Home Improvements (811 KB)

 

 

 

Specification

Lengths

Available in two stock lengths: 2400mm and 3000mm.

Specification

Wall Thickness Area Weight Temper Moments of inertis
1.6 mm 453.29 mm2 1.230 kg/m T5 lxx = lyy = 0.292 x 106 mm4

Availability

Availability

NSW/
ACT
VICTASQLDNTSAWA
Avail. Avail. Avail. Avail. Not Avail. Not Avail. Not Avail.


Colour Range

 NSW QLD
To match Paperbark® yes yes
To match Dover White
yes yes
To match Classic Cream™
yes yes
Unpainted yes  



 
BlueScope Steel Limited
ABN 16 000 011 058
BlueScope and Lysaght
are trademarks of BlueScope Steel Limited
Australian Made Lysaght