LYSAGHT SHEERLINE® Gutter and Capping

Product Description and Features

The LYSAGHT SHEERLINE® fascia gutter system from BlueScope Lysaght features concealed fixing and is designed for greater durability, longer life and compatibility with steel and tile roofs. With the choice of optional slotting to allow overflow where alternative overflow devices are not installed, as well as all the components needed for a perfect finish, LYSAGHT SHEERLINE® is an extremely flexible gutter system.

• Manufactured from light, strong, hi-tensile ZINCALUME® steel or COLORBOND® steel for up to four times the life of a galvanised gutter in similar conditions
• Fast and easy to install
• Comes in long lengths that match BlueScope Lysaght's roofing and walling profiles perfectly
• Its strength helps reduce possible damage during transit and installation

Note:

• This product is not available in Queensland and the slotted product is not available in Western Australia
• It is important gutters slope towards the outlets (a minimum gutter fall of 1 in 500 is recommended). Without this slope, 'ponding' may occur, reducing the life of your gutter
• When installing gutters, remove any metal particles or debris at the end of the day to prevent staining or corrosion
• Do not install galvanised gutters with a ZINCALUME® steel or COLORBOND® prepainted steel roof. Galvanised gutters are only suitable with galvanised steel roof
• The protective plastic film should be stripped off immediately on installation
• Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel.

This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"

Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.

Fields marked with * are required

Schematic

STATE	NSW VIC/TAS	WA	SA
A(mm) B(mm) C(mm)	81 141 124	83 140 127	72.5 141 124

 

Disclaimer

Availability

Type	NSW	VIC	QLD	SA	NT1	WA2	TAS
SLOTTED	Avail.	Avail.	Not Avail.	Avail.	Avail.	Not Avail.	Avail.
UNSLOTTED	Avail.	Avail.	Not Avail.	Avail.	Avail.	Avail.	Avail.
1 In the Northern Territory, SHEERLINE® is also known as Square Profile 2 Stock lengths are 6 and 8m, or custom cut lengths up to 8m.

Colour Range

LYSAGHT SHEERLINE® gutters and accessories are available in ZINCALUME® steel, COLORBOND® steel, and COLORBOND® steel high gloss colours. View the COLORBOND® steel colours. For high gloss colour availability please contact your local supplier.

Designing Roof Drainage

Correct design of a roof drainage system is critical to the waterproofing of a building. This is a task that should only be carried out by a suitably qualified trade professional in accordance with the BCA and Australian Standards.

In the design and detailing of a roof drainage system, consideration must be given to a range of factors such as:

• rainfall intensity
• roof catchment area
• gutter size/capacity
• gutter fall
• gutter outlets (sumps, rain heads, nozzles)
• downpipe size, quantity and placement
• overflow consideration
• material selection and
• jointing

View information on the design of roof drainage systems by downloading the brochure for your state:

• Download LYSAGHT® Rainwater Solutions New South Wales (1647 KB)
• Download LYSAGHT® Rainwater Solutions Victoria, Tasmania (1658 KB)
• Download LYSAGHT® Rainwater Solutions South Australia (1992 KB)
• Download LYSAGHT® Rainwater Solutions Western Australia (1785 KB)
• Download Office of Fair Trading Residential Gutters Quick Reference Installation Guide (174 KB)

 

Downpipe Design

The downpipe size and spacing should be determined in accordance with AS/NZ3500.3.2:1998 National plumbing and drainage: Part 3.2: Stormwater drainage - Acceptable solutions.