|
|
|
LYSAGHT TRIMWALL®
Product Description and Features
LYSAGHT TRIMWALL® is an attractive, lightweight and versatile walling profile designed for domestic, rural and commercial applications.
- Light, Easy to handle and quick to install
- Complements the LYSAGHT TRIMDEK® roofing profile
- Large spans possible
- Available in a wide variety of COLORBOND® steel colours and ZINCALUME® steel
Note:
- LYSAGHT TRIMWALL® is only suitable in for use for walling in non-cyclonic areas
- Read our Guidelines for using COLORBOND® steel & ZINCALUME® steel.
Brochures
LYSAGHT® Walling Solutions
- Download Now (886 KB)
LYSAGHT TRIMWALL® CAD Drawing File
- Download Now (21 KB)
This search will find the ten closest suppliers for the location you enter, for the selected product. Fill in each of the fields below, then click "SEARCH"
Please note this locator only contains suppliers in AUSTRALIA. If you need suppliers in other countries please contact your local BlueScope Steel office.
Fields marked with * are required
You may choose to Search for Supplier by Name
Span Tables and Capacity & Load Tables
Span Tables and limit state wind pressure capacity table can be viewed in the LYSAGHT Walling Solutions brochure. Download LYSAGHT® Walling Solutions (886 KB)
This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.
Length
Sheets are supplied custom cut.
Tolerances
Length: + 0 mm, - 15 mm
Cover: + 4 mm, - 4 mm
Material Specifications
- ZINCALUME® steel made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 6, is made from stainless steel complying with JIS G 4305, Grade 430 stainless steel, 430SS550. Subject to enquiry
- The base metal thickness is 0.35mm (0.42mm BMT LYSAGHT CUSTOM ORB® supplied in NSW)
Mass - COLORBOND® steel
BMT 0.35mm: 3.67kg/m2
Schematic
Availability
| NSW/ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Avail. | Avail. | Avail. | Avail. | Avail. | Avail. | Avail. |
Colour Range
LYSAGHT TRIMWALL® is available in a limited range of COLORBOND® steel colours and in unpainted ZINCALUME® steel.
Please check with your local supplier regarding specific colour availability for this product.
FAQs
Can LYSAGHT TRIMWALL® be used for roofing?
LYSAGHT TRIMWALL® is available in a 0.35mm base metal thickness (BMT). For roofing products we recommended using 0.42mm or 0.48 BMT our roofing equivelent for TRIMWALL® is TRIMDEK®
What is cladding and how does it relate to roofing and walling?
Cladding is a collective term for any sheeting that covers a building, whether it be on the roof of the building, or on the walls. Roof cladding is made from thicker steel and is rolled to a profile capable of supporting roof traffic*. In most cases, these roof claddings can also be used for walling as well. Wall cladding is made from thinner steel, rolled to a less rigid profile. They are generally not capable of supporting roof traffic, prohibiting their use as roofing.
*Some roofing is designed to be non-trafficable. Please consult the span and capacity tables of the cladding for further details.
Design
Span Tables and Capacity & Load Tables
Span Tables and limit state wind pressure capacity table can be viewed in the LYSAGHT Walling Solutions brochure. Download LYSAGHT® Walling Solutions (886 KB)
This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.
Specifications
Length
Sheets are supplied custom cut.
Tolerances
Length: + 0 mm, - 15 mm
Cover: + 4 mm, - 4 mm
Material Specifications
- ZINCALUME® steel made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 6, is made from stainless steel complying with JIS G 4305, Grade 430 stainless steel, 430SS550. Subject to enquiry
- The base metal thickness is 0.35mm (0.42mm BMT LYSAGHT CUSTOM ORB® supplied in NSW)
Mass - COLORBOND® steel
BMT 0.35mm: 3.67kg/m2
Schematic
Availability
Availability
| NSW/ACT | VIC | TAS | QLD | NT | SA | WA |
|---|---|---|---|---|---|---|
| Avail. | Avail. | Avail. | Avail. | Avail. | Avail. | Avail. |
Colour Range
LYSAGHT TRIMWALL® is available in a limited range of COLORBOND® steel colours and in unpainted ZINCALUME® steel.
Please check with your local supplier regarding specific colour availability for this product.
