How To Finish LYSAGHT INTERLOK® II grating using our accessories

A number of accessories are available to finish off LYSAGHT INTERLOK® II gratings. These are detailed below with assembly instructions.

Accessory

Name

Part No.

Description (mm)

Heel Toe Side Plates

G1705

1.20 x 170 x 3600

Heel Toe
End Plates

G170E

1.20 x 170 x 3600

Filler Panel 75mm

G065FP

1.20 x 65 x 3600

Carrier Plate

G065CP

For 224mm stairtreads.
14mm round hole
40 x 14 slotted hole, use M12 bolts

End Plates

G065EP

3.00mm
14mm holes for joining ends of 224mm wide panels

Splice Plates

G065SP

3.00 x 56 x 560 with 12mm holes
for splicing panels end to end

Hold Down Clip

G065HDC

Attachment for fastening to supporting members
through topside of grating (65mm deep grating only)

Heel Toe End Plate Bracket

G065EB

2.00 x 56 x 80 x 80
12mm holes for attaching heel/toe end plates
to ends of grating

LYSAGHT INTERLOK® II J-bolt, nut & lockwasher

J Bolt Nut and Lock Washer

G000JB

M8 x 50 for fastening panels to
supporting members from underside of grating

Hexhead Bolt Nut & Lock Washer

G006HB
G010HB
G012HB

M6 x 20
M10 x 25
M12 x 25

Crimping Tool

GCT

Crimping Tool

Assembly of Accessories

Heel Toe Side Plate

Drill 12mm diameter hole in side plate and attach using M10 bolts at 1200mm centres. Use G1705 with both G06512 and G06520.

Heel Toe End Plate

Drill 12mm diameter hole in end plate and grating and attach at 2300mm centres using end plate bracket and M10 bolts.

Splice Plate

Predrill 14mm diameter holes through webs of grating section. Interlock the sections and fit splice plate. Connect using M12 bolts.

Carrier Plate

Cut G06520 section to length and fit carrier plates each end. Weld each carrier plate with four welds 15mm long, or fix with two 4.8mm diameter rivets each end of each carrier plate. In the case of welding, repair damaged zinc coating with a suitable zinc-rich paint.